Reparing the screen of a Quicko T12 soldering iron
This morning i realized the screen of my soldering iron was broken. I like that soldering iron, it is similar to that one with a STC chip and the main power supply included. I looked on the net and found this post My T12 control board is slightly different; it is not just connecting the VCC/VDD/SCL/SDA but the whole 30 pins ribbon. I removed the whole lcd+ribbon from one of those cheap LCD screen s i had in the spare box and solder it in place of the original one. The screen is smaller than the original one but it's not really a problem. It works fine.